The Lancelot carving discs can be used for rapid wood removal or more delicately for feathering and texturing. The Lancelot disc is available in a 14 tooth model for coarse work or 22 tooth for fine work. It has a 5/8" hole for mounting on a 4-1/2" angle grinder with a paddle or constant pressure switch (not included).
The Lancelot is made of a circle of special chainsaw chain mounted between two stainless steel discs. The chain has consecutive left and right teeth without a skip link, giving twice the number of teeth as a regular chainsaw chain, giving it the ability to power through hardwoods easily. Should the blade hit a nail or piece of wire in wood, on most occasions it will cut through the obstruction. If not, the impact will cause the chain to stop while the discs rotate giving the user a warning to stop the angle grinder. The Lancelot chains are easily sharpened with a 5/32" (4mm) chain saw file.
The Lancelot will fit most 4-1/2" angle grinders with 10,000 to 13,000 rpm and a 5/8" shaft (not recommended for 4" angle grinders).
By using the universal nut offered, more than one Lancelot disc can be mounted on the shaft for more rapid wood removal. Also, combinations of fine or coarse Lancelot and Squire discs can be used for faster removal of concave surfaces.
|301821||Lancelot 14 Tooth Disc||$49.95|
|301822||Lancelot 22 Tooth Disc||$49.95|
|301823||Repl 14 Tooth Chain for Lancelot||$24.95|
|301824||Repl 22 Tooth Chain for Lancelot||$24.95|
|301810||KA 5/8" Universal Nut||$9.95|
Copyright 2000-2015, Packard Woodworks Inc., All Rights Reserved