This is a "Jacobs" type chuck that fits in the Morse Taper of your headstock or tailstock. The Key Chuck has many uses. For example, you can use the Key Chuck to hold miniature stock for turning, or to hold drill bits for boring weed pots, tool handles or depth holes. The maximum holding capacity of this chuck is 1/2" diameter. The Morse taper for the chuck is threaded to accept a 1/4" x 20 TPI draw bar made by the user.
|111011||1/2'' Key Chuck #1MT||$36.95|
|111012||1/2'' Key Chuck #2MT||$36.95|
Copyright 2000-2015, Packard Woodworks Inc., All Rights Reserved