Now you can make a distinctive desk set that is sure to impress anyone on your gift list. The Sculptured Pen, Letter Opener and Magnifying Glass all have 24 karat plating with a tough epoxy coating. They will get a lot of attention at shows as well. The Magnifier is 2" in diameter and the letter opener has a 4-1/2" blade. All three kits require an 8mm hole to be drilled in the wood blank and are turned on our pen mandrel with the bushing set sold below.
Bushings: Bushings are needed to turn the project on the pen mandrels we offer. The bushings are used to size the outside diameter of the workpiece correctly for the specific project. They are also used to adapt the pen mandrel for project tubes larger than the mandrel shaft. Only one set of bushings are needed for many kits. After the bushings are worn down from sanding they will need replacing.
|152910||24K Sculptured Pen Kit||$10.95|
|152911||Sculptured Letter Opener Kit||$10.95|
|152912||Sculptured Magnifer Kit||$12.50|
|152913||Set of all Three Sculptured Kits||$30.95|
|150118||8mm Drill Bit||$6.50|
|152910B||Sculptured Bushing Set||$5.95|
Copyright 2000-2014, Packard Woodworks Inc., All Rights Reserved