Popular at craft shows or as gifts, these perfume atomizers will be excellent additions to your offerings as a woodturner. We offer two designs: one is designed for putting on a table top and the other for putting in a purse. Both are made with 24k gold plated and solid brass parts with epoxy coating. The perfume is held in a removable 1/10 oz. glass vial that fits inside the atomizer body, preventing contact with the brass parts. A 15mm drill bit is required to bore the hole for the brass tubes. Each kit includes a small syringe to fill the vial with perfume. Perfume Atomizers are turned on the Standard Mandrel using the bushings sold below.
Bushings: Bushings are needed to turn the project on the pen mandrels we offer. The bushings are used to size the outside diameter of the workpiece correctly for the specific project. They are also used to adapt the pen mandrel for project tubes larger than the mandrel shaft. Only one set of bushings are needed for many kits. After the bushings are worn down from sanding they will need replacing.
|154911||24K Table Top Perfume Atomizer Kit||$8.95|
|154911B||Perfume Atomizer Bushings||$5.95|
|150119||15mm Forstner Bit||$7.95|
Copyright 2000-2015, Packard Woodworks Inc., All Rights Reserved