These tools are used for hollowing into endgrain or face grain while working though the smaller opening in closed form vessels. When making closed shaped vessels, first a depth hole is drilled, then it is enlarged by using the Probe Tool, then the Swan Neck Tool is used to hollow out further to form the sides of the vessel.
We offer two sizes of Probe and Swan Neck Tools, one pair with 3/8" diameter shanks and the other with 1/2" diameter. Each of the 3/8" tools has one replaceable high speed steel cutter, while the 1/2" tools each come with one replaceable bullet cutter for roughing and a replaceable ball end cutter for smoothing cuts. Each tool can be sharpened on a grinder or with a diamond hone for longer life. The overall length of the 3/8" diameter tools is 20", while the 1/2" diameter tools measure 24".
Maximum Project size for the 3/8" tools is approx. 5-1/2" with the max. of the 1/2" tools is 7".
|108770||Sorby 3/8'' Probe Tool||$48.95|
|108771||Sorby 3/8'' Swan Neck Tool||$50.95|
|108772||Sorby 3/8'' Replacement Bullet Cutter||$12.95|
|108773||Sorby 1/2'' Probe Tool||$63.95|
|108780||Sorby 1/2'' Replacement Bullet Cutter||$14.95|
|108781||Sorby 1/2'' Ball End Cutter||$14.95|
Copyright 2000-2013, Packard Woodworks Inc., All Rights Reserved