JAM Carbide Cutter Assembly

• Mounted on 3/16"sq. holder at 30˚ angle for a smooth shearing cut
• 6mm (1/4") diameter Carbide Cutter
• Use up to 50 hours before replacing
• Held in swivel holder (not included)

Get a smooth cut and never have to sharpen this cutter! This 3/16" diameter carbide cutter comes mounted on a 3/16” sq steel shank that is then held by the Jamieson swivel holder (not included). The cutter is angled at 30˚ for a good cut. When it starts to dull, rotate it to a fresh edge. Depending on the wood, each cutter should last for about 50 hours of use.