Jumbo 280 Grit CBN Wheel for Tormek

Code 141785
Quantity in Cart None



Jumbo 280 Grit CBN Wheel for Tormek
  • Cuts faster than regular wheels
  • Use wet or dry grinding
  • Generates little if any heat
  • Good finish left on tool
  • Perfect for high speed steel
  • Wheel stays flat and true
  • 280 Grit Wheel produces a sharp edge
  • 250mm by 40mm, includes a spacer

This Woodcut CBN Wheel is made for use on the Tormek T-6 and T-7 and T-8 Tormek wet grinders. The wheel is a 280 grit to give a good finish on the tool. This wheel will cut about 30% to 50% faster than the standard wheel that comes on the grinder. The CBN Wheel can be used dry and will not heat up and blue the tool. Includes spacer to make up for the 10mm difference in wheel width for Tormek. Wheel bore 12mm. CBN Wheels are used for grinding hardened steels and cannot be used on carbide. We offer a cleaning stick for use on CBN wheels below.

We accept Visa, Mastercard, Discover, and American Express

Copyright 2000-2015, Packard Woodworks Inc., All Rights Reserved