This is the largest pen kit we sell and should be well suited to people with larger hands. Just twist to expose or retract the point. Wood blanks used to make this kit need to be at least 3/4" square.
The Cigar Pen Kit is turned on our standard pen mandrel with the bushings and 10mm drill bit offered below.
Bushings: Bushings are needed to turn the project on the pen mandrels we offer. The bushings are used to size the outside diameter of the workpiece correctly for the specific project. They are also used to adapt the pen mandrel for project tubes larger than the mandrel shaft. Only one set of bushings are needed for many kits. After the bushings are worn down from sanding they will need replacing.
Copyright 2000-2015, Packard Woodworks Inc., All Rights Reserved