This is the largest pen kit we sell and should be well suited to people with larger hands. The Cigar Pen is available in several finishes for a variety of looks. Just twist to expose or retract the point. The Cigar Pen Kit requires an optional 10mm drill bit. This kit requires 3/4" blanks. Wood blanks used to make this kit need to be at least 3/4" square.
Bushings are needed to turn this project on the pen mandrels we offer. The bushings are used to size the outside diameter of the workpiece correctly for the specific project. They are also used to adapt the pen mandrel for project tubes larger than the mandrel shaft. Only one set of bushings is needed to make numerous kits. After the bushings are worn down from sanding they will need replacing.
Copyright 2000-2015, Packard Woodworks Inc., All Rights Reserved