FREE GROUND SHIPPING ON ORDERS OVER $500
Secure Checkout
Laguna 14/12 Bandsaw

Thumbnail Filmstrip of Laguna 14/12 Bandsaw Images

    Purchase Laguna 14/12 Bandsaw

    SKU: 201412 Laguna 14/12 Bandsaw

    $1,699.00
     



    The 14|12 Bandsaw features a pyramid shaped spine, 1 ¾ HP TEFC 115v Motor, quick release tension, 115 volt outlet and micro polished 21" X 16″ table mounted onto oversized Trunion paired with Aluminum Hi/Low Fence. 14" Iron Cast Wheels are electronically, dynamically balanced & fitted with polyurethane one-piece tires designed to run cooler & last longer than conventional tires. The upper guides travel uses a worm gear & pinion mechanism for ultra-smooth. It is engineered to have minimum flex even when fully extended. The Laguna ceramic Laguna guides are accurate and easy to set. Double windows allow you to check both tension & tracking while the machine is running.

    Laguna Bandsaws do not include a blade.

    • Laguna Ceramic Guides
    • 4″ Dust Port
    • 110 Volt Outlet
    • Tension Window
    • Tension Indicator
    • Tracking Window
    • 14" Cast Iron Wheels
    • Table Height 38″
    • 45 Degree Table Tilt Right
    • 7 Degree Table Tilt Left
    • 90 Degree Positive Stop
    • 21 1/2″ x 16″ Table
    • Quick-Release Tension
    • Rack & Pinion Upper Guide
    • Heavy Duty Cast Trunion 8″ x 13″
    • Included: 6 Ft Cord w/plug, Nema: 5-15P
    • Premium Anodized Aluminum Throat Plate
    • Hi/Low Aluminum Fence 18″ x 5 1/2″ x 1/2 ”
    • Dual Voltage 1-3/4hp Motor 115/230, Pre-Wired 115 Volt
    • Motor: 14/7 Amp TEFC
    • Safety Key
    • 12″ Resaw -Stand Included
    • Blade Length: 115″
    • Min. Blade Width: 1/8″
    • Max. Blade Width: 3/4″ -Illuminated On/Off Switch

    There is a $150 shipping charge for the 14/BX Bandsaw

    This item is shipped from the manufacturer by truck. Air shipping and international shipping are not available for this item. Ships to the 48 contiguous states only. It is not available for pick up at our facility.


    Table Tilt Right: 45°

    Table Tilt Left: 7°

    Positive Stop: 90°

    Table Size: 21-½″ x 16″

    Quick-Release Tension

    Rack & Pinion Upper Guide

    Heavy Duty Cast Trunion: 8″ x 13″

    Included: 6ft Cord With Plug

    Plug: NEMA 5-15P

    Premium Anodized Aluminum Throat Plate

    Hi/Low Aluminum Fence: 18″ x 5-½″ x ½″

    Dual Voltage Motor: 115/230, Pre-Wired 115 Volt

    Motor: 14/7 Amp TEFC

    HP:1-¾, 115/230V

    Safety Key

    Stand Included

    Blade Length: 115″

    Min Blade Width: ⅛″

    Max Blade Width: ¾″

    Shipping Weight: 350lbs

    Shipping Dimensions (L x W x H): 55in x 22in x 25in

    NEMA Plug: 5-15P

    Cord: 6 ft

    The bandsaw does not come with a blade. You will need to choose blades based on the type of cutting that you will be doing and order the correct length and width. This saw takes a 115” blade.

    The work lights are an optional accessory that are available separately. There are pre-drilled mounting locations for the light and an outlet located on the rear of the saw to plug the light in.

    The blade should be centered on the tire and tracked to remain in the center when the wheels are spun by hand. You can verify the position of the blade by looking through the tracking window on the side of the upper cabinet.

    Laguna recommends releasing the blade tension when you are finished using the saw for the day. The 14|12 has a quick tension release lever on the back of the saw. You will want to develop a habit of checking to make sure that the blade is tensioned before using the saw. You can view the tension indicator through the window on the upper door.

    You will want to use the widest blade that your saw will accept for resawing. This keeps more blade in the guides and provides more “beam strength” in the blade which makes for more accurate cuts. We recommend the Resaw King blade which is carbide-tipped and resharpenable. The ¾” x 115” is the correct fit for this saw.

    You will want to use the widest blade you can for the radius of curves that you will be cutting without binding. The tighter the curves, the narrower the blade that you will need. Two popular choices for starting off are a ¼” x 6 TPI ProForce blade for tight curves and a ½” x 3 TPI ProForce blade for gentle curves and general-purpose work.

    The 14|12 bandsaw will accept ¼” up to ¾” blades on the stock ceramic guides that come with the saw. You can use blades smaller than ¼” when using the optional Mini Guides. Blades narrower than ¼” run out of sufficient beam area behind the teeth and gullets to properly support the blade. The Mini Guides use wearable phenolic insert rods that surround the blade (including the blade teeth). The rods are not harmful to the blade teeth and will gradually wear down during use. The rods can be turned and pushed in as they wear. Replacement rods are available for purchase.

    Yes, the “Insert Block" is made of plastic so that it does not damage the blade should it touch the blade or teeth. This block is positioned in a slot on the right-hand side of the lower cabinet just under the table. This block seals off the area surrounding the blade to improve dust collection. Your saw will work perfectly with the block removed although dust collection will be better with it in place.

    Yes, the 14|12 Bandsaw is CSA inspected and certified. The CSA certification means it has been tested against applicable North American standards requirements and is widely accepted by many government and code officials, regulatory and regulation bodies, leading retailers, and Authorities Having Jurisdiction (AHJ). The CSA mark demonstrates that a product has been rigorously tested to applicable standards. These include standards written or administered by the American National Standards Institute (ANSI), Underwriters Laboratories (UL), CSA Group (CSA), NSF International (NSF), and other North American and global organizations.

    The Insert Block is used to improve dust collection by reducing the gap at the bottom of the dust collection area of the saw.  Your saw can be operated without the insert block in place while you are waiting for a replacement.  The tighter the opening where the blade exits the dust collection chamber, the better the dust collection.  Since the insert block is used in very close proximity to the blade, it is designed of plastic so that it does not damage the blade should the two items come into contact.  The insert block, like the blade, are considered wear items.  The insert block, like a Zero Clearance throat plate on a tablesaw, will get worn over time and is designed to be replaced occasionally. Users can also make their own replacement insert block from a piece of plywood or MDF.  Should you create your own insert block, cut the block to size and then with the saw unplugged slide the block into the groove while rotating the wheels by hand so that the blade can cut the slot while the block is pushed into its groove.  Use pliers to hold the block while cutting the groove to keep your hands and fingers away from the blade.  

    New woodworking machines sold by Laguna Tools carry a two-year warranty. Machines sold through dealers must be registered with Laguna Tools within 30 days of purchase to be covered by this warranty. Laguna Tools guarantees all new machines sold to be free of manufacturers’ defective workmanship, parts and materials.

    To register your machine, follow the link below and complete the online form. You will need to upload a copy of your receipt. This can be the receipt file from a dealer, a scan, or photo of your receipt.